Skip navigation

these are some random electronic sculptures, I made them using leftover/ unusable parts and scrap pcbs.  The first one I made is a person, based around a DIP switch.  I tried to solder it into a pcb with some pullup resistors for use in breadboarding, but it didn’t work.  So I built something with some resistors from a hundred pack, an LED with short leads, and a scrap of pcb:

I made several more of these for friends and family, but do not have photographs of all but one:

last, I made a fighter jet, using a free serial port, 5 LEDs I got for 5 cents each, 2 unmarked TO-220 transistors, a few resistors, a DIP switch, a photocell, a switch, and a few resistors on a custom-cut pcb (took a while).


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: